It can successfully recognise the NAND.
The issue is that U-BOOT uses pins PE0 and PE1 as RX and TX, instead of PA2 and PA3. This means you cannot use the onboard USB to UART converter.
]]>还是拆了换NOR FLASH吧
嗯嗯,我觉得目前也只能这样了
先将就着用
I also have the tiny200 with...
Thanks for the heads up. I'll take a look and see if I can get it to work
]]>https://whycan.cn/files/members/4865/GD5F1GQ4UAY-GigaDevice.pdf
]]>I uploaded the code to http://github.com/matheusrfdesign/sunxi-tools if anyone is interested in continuing the work.
]]>开源版本的sunxi-fel不支持spi nand读写,显示128k应该是id冲突了。
有啥其他方法可以烧写nand吗?
还是我只能依靠TF卡来用Tiny200了?
应该是5F1G吧。
不好意思...
16M nor FLASH 或者 nand flash
widora wiki 说 “TINY200的背面有SOP8焊盘,能装NAND或NOR,默认焊接了16M NOR”
淘宝上说NAND 也是128MB,不是128KB啊?
-------------
128M 是 MB 的意思吗?
]]>查了下,是兆易创新的spi flash吧,7块多呢。
]]>