WhyCan Forum(哇酷开发者社区)

我们能随心所欲"有问题百度(谷歌)一下", 这得感谢为中文互联网持续输出优质内容的各位老铁们。 QQ: 516333132, 微信(wechat): whycan_cn (哇酷网/挖坑网/填坑网) service@whycan.cn

您尚未登录。

#1 2020-01-13 15:31:45

加油啦66
会员
注册时间: 2019-11-26
累计积分: 1

ERROR: Did not find a cmdline Flattened Device Tree

U-Boot 2018.01 (Jan 13 2020 - 15:02:06 +0800) Allwinner Technology

CPU:   Allwinner F Series (SUNIV)
Model: Lichee Pi Nano
DRAM:  32 MiB
MMC:   SUNXI SD/MMC: 0
SF: Detected xt25f128b with page size 256 Bytes, erase size 64 KiB, total 16 MiB
*** Warning - bad CRC, using default environment

In:    serial@1c25000
Out:   serial@1c25000
Err:   serial@1c25000
Net:   No ethernet found.
starting USB...
No controllers found
Hit any key to stop autoboot:  0
SF: Detected xt25f128b with page size 256 Bytes, erase size 64 KiB, total 16 MiB
device 0 offset 0x100000, size 0x4000
SF: 16384 bytes @ 0x100000 Read: OK
device 0 offset 0x110000, size 0x400000
SF: 4194304 bytes @ 0x110000 Read: OK
ERROR: Did not find a cmdline Flattened Device Tree
Could not find a valid device tree



各位大神,移植出现此情况,不知道这个设备树是指哪一个,uboot里面也有suniv-f1c100s-licheepi-nano.dtb文件  linux文件里也有个suniv-f1c100s-licheepi-nano.dtb文件

离线

#2 2020-01-13 15:35:54

晕哥
管理员
注册时间: 2017-09-06
累计积分: 9,188

Re: ERROR: Did not find a cmdline Flattened Device Tree

你的 u-boot 已经跑起来了, 指的是 linux 的设备树。

离线

页脚

工信部备案:粤ICP备20025096号-1 Powered by FluxBB