WhyCan Forum

人过留名,雁过留声,感谢各位朋友不离不弃地支持。 QQ: 516333132 (挖坑网/填坑网) admin@whycan.cn

您尚未登录。

#201 2019-05-15 11:22:58

晕哥小弟
会员
注册时间: 2019-04-04
累计积分: 202

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

晕哥,使用BSP内核,选通了ov5640。然后也更改了fex。

[csi1]                                                                         
vip_used                 = 1                                                   
vip_mode                 = 0                                                   
vip_dev_qty              = 1                                                   
vip_define_sensor_list   = 0                                                   
vip_csi_pck              = port:PE00<2><default><default><default>             
vip_csi_mck              = port:PE01<2><default><default><default>             
vip_csi_hsync            = port:PE02<2><default><default><default>             
vip_csi_vsync            = port:PE03<2><default><default><default>             
vip_csi_d0               = port:PE04<2><default><default><default>             
vip_csi_d1               = port:PE05<2><default><default><default>             
vip_csi_d2               = port:PE06<2><default><default><default>             
vip_csi_d3               = port:PE07<2><default><default><default>             
vip_csi_d4               = port:PE08<2><default><default><default>             
vip_csi_d5               = port:PE09<2><default><default><default>             
vip_csi_d6               = port:PE10<2><default><default><default>             
vip_csi_d7               = port:PE11<2><default><default><default>             
vip_csi_d8               = port:PE12<2><default><default><default>             
;vip_csi_d9               = port:PE13<2><default><default><default>             
vip_csi_d10               = port:PE14<2><default><default><default>             
vip_csi_d11               = port:PE15<2><default><default><default>             
                                                                               
vip_csi_sck               = port:PE21<2><default><default><default>             
vip_csi_sda               = port:PE22<2><default><default><default>             
                                                                               
vip_dev0_mname           = "ov5640"                                             
vip_dev0_pos             = "front"                                             
vip_dev0_twi_id          = 4                                                   
vip_dev0_twi_addr        = 0x78                                                 
vip_dev0_isp_used        = 0                                                   
vip_dev0_fmt             = 0                                                   
vip_dev0_stby_mode       = 0                                                   
vip_dev0_vflip           = 0                                                   
vip_dev0_hflip           = 0                                                   
vip_dev0_iovdd           = ""                                                   
vip_dev0_iovdd_vol       = 2800000                                             
vip_dev0_avdd            = ""                                                   
vip_dev0_avdd_vol        = 2800000                                             
vip_dev0_dvdd            = ""                                                   
vip_dev0_dvdd_vol        = 1500000                                             
vip_dev0_afvdd           = ""                                                   
vip_dev0_afvdd_vol       = 2800000                                             
vip_dev0_power_en        =                                                     
vip_dev0_reset           = port:PE23<1><default><default><default>
vip_dev0_pwdn            = port:PE24<1><default><default><default>             
vip_dev0_flash_en        =                                                     
vip_dev0_flash_mode      =                                                     
vip_dev0_af_pwdn         =                                                     
                                                                               
vip_dev0_act_used        = 0                                                   
vip_dev0_act_name        = "ad5820_act"                                         
vip_dev0_act_slave       = 0x18                                                 
                                                                               
vip_dev1_mname           = "gc2035"                                             
vip_dev1_pos                 = "front"                                         
vip_dev1_lane            = 1                                                   
vip_dev1_twi_id          = 4                                                   
vip_dev1_twi_addr        = 0x78                                                 
vip_dev1_isp_used        = 0                                                   
vip_dev1_fmt             = 1                                                   
vip_dev1_stby_mode       = 0                                                   
vip_dev1_vflip           = 0                                                   
vip_dev1_hflip           = 0                                                   
vip_dev1_iovdd           = ""                                                   
vip_dev1_iovdd_vol       = 2800000                                             
vip_dev1_avdd            = ""                                                   
vip_dev1_avdd_vol        = 2800000                                             
vip_dev1_dvdd            = ""                                                   
vip_dev1_dvdd_vol        = 1500000                                             
vip_dev1_afvdd           = ""                                                   
vip_dev1_afvdd_vol       = 2800000                                             
vip_dev1_power_en        =                                                     
vip_dev1_reset           =                                                     
vip_dev1_pwdn            =                                                     
vip_dev1_flash_en        =                                                     
vip_dev1_flash_mode      =                                                     
vip_dev1_af_pwdn         =

可是在用fswebcam拍照时

# fswebcam -S 10 -d /dev/video1 -p YUV420P -r 640x480 test21.jpg
[   26.003939] [VFE]vfe_open
--- Opening /dev/video1...
[   26.007092] [VFE]..........................vfe clk open!.......................
Trying source module v4l2...[   26.018941] [VFE]vfe_open ok

/dev/video1 opened.
[   26.024950] [VFE_ERR]input index(0) > dev->dev_qty(1)-1 invalid!, device_valid_flag[0] = 0
No input was specified, usin[   26.037247] [VFE]vfe_close
g the first.
Unable to[   26.042806] [VFE]vfe select input flag = 0, s_input have not be used .
query input 0.
VIDIOC[   26.053040] [VFE]..........................vfe clk close!.......................
_ENUMINPUT: Invalid argument
   26.064499] [VFE]vfe_close end
0m#
#
#
#
#
#
#
#
# i2cd
i2cdetect  i2cdump
# i2cd
i2cdetect  i2cdump
# i2cdetect -l
i2cdetect: can't open '/sys/class/i2c-dev': No such file or directory
# i2cdetect -y 1
i2cdetect: can't open '/dev/i2c/1': No such file or directory
# ls
#

这是什么原因呢

离线

#202 2019-05-15 11:33:22

晕哥
Administrator
注册时间: 2017-09-06
累计积分: 8,154

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

有没有 /dev/i2cX,   /dev/i2c/X 这些设备, 如果没有可能是 menuconfig 上面没有勾选 I2C User Interface

离线

#203 2019-05-15 11:40:59

晕哥小弟
会员
注册时间: 2019-04-04
累计积分: 202

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

晕哥 说:

有没有 /dev/i2cX,   /dev/i2c/X 这些设备, 如果没有可能是 menuconfig 上面没有勾选 I2C User Interface


主要是这个错误

--- Opening /dev/video1...
[   33.650171] [VFE]vfe_open
Trying source module v4l2...[   33.656150] [VFE]..........................vfe clk open!.......................

[   33.667840] [VFE]vfe_open ok
[   33.671467] [VFE_ERR]input index(0) > dev->dev_qty(1)-1 invalid!, device_valid_flag[0] = 0
/dev/video1 opened.
No [   33.681675] [VFE]vfe_close
input was specified, using the f[   33.686958] [VFE]vfe select input flag = 0, s_input have not be used .
irst.
Unable to query [   33.697235] [VFE]..........................vfe clk close!.......................
input 0.
VIDIOC_ENUMIN[   33.708530] [VFE]vfe_close end
PUT: Invalid argument

不知道这个是什么造成的

最近编辑记录 晕哥小弟 (2019-05-15 11:41:19)

离线

#204 2019-05-15 11:42:03

晕哥小弟
会员
注册时间: 2019-04-04
累计积分: 202

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

https://www.kancloud.cn/lichee/lpi0/470832
群主也有这个问题,但是没有说清楚。

离线

#205 2019-05-15 11:43:09

晕哥小弟
会员
注册时间: 2019-04-04
累计积分: 202

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Linux version 3.4.39 (he@he) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-29) ) #37 Wed May 15 11:39:13 CST 2019
[    0.000000] Initialized persistent memory from 41d20800-41d307ff
[    0.000000] Kernel command line: console=ttyS0,115200 panic=5 rootwait root=/dev/mmcblk0p2 earlyprintk rw
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Memory: 64MB = 64MB total
[    0.000000] Memory: 29176k/29176k available, 36360k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xc4800000 - 0xff000000   ( 936 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc4000000   (  64 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc052b000   (5260 kB)
[    0.000000]       .init : 0xc052b000 - 0xc054f000   ( 144 kB)
[    0.000000]       .data : 0xc0550000 - 0xc05cd490   ( 502 kB)
[    0.000000]        .bss : 0xc05cd4b4 - 0xc06ae354   ( 900 kB)
[    0.000000] NR_IRQS:544
[    0.000000] Architected local timer running at 24.00MHz.
[    0.000000] Switching to timer-based delay loop
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] Console: colour dummy device 80x30
[    0.000148] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
[    0.000168] pid_max: default: 32768 minimum: 301
[    0.000312] Mount-cache hash table entries: 512
[    0.000870] CPU: Testing write buffer coherency: ok
[    0.001132] Setting up static identity map for 0x403aa208 - 0x403aa260
[    0.001816] devtmpfs: initialized
[    0.003522] pinctrl core: initialized pinctrl subsystem
[    0.004012] NET: Registered protocol family 16
[    0.004320] DMA: preallocated 128 KiB pool for atomic coherent allocations
[    0.004380] script_sysfs_init success
[    0.005154] gpiochip_add: registered GPIOs 0 to 223 on device: sunxi-pinctrl
[    0.006059] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
[    0.006427] gpiochip_add: registered GPIOs 1024 to 1031 on device: axp-pinctrl
[    0.007202] persistent_ram: found existing buffer, size 21180, start 21180
[    0.101129] console [ram-1] enabled
[    0.102061] Not Found clk pll_isp in script 
[    0.102194] Not Found clk pll_video in script 
[    0.102422] Not Found clk pll_ve in script 
[    0.102544] Not Found clk pll_periph0 in script 
[    0.102665] Not Found clk pll_de in script 
[    0.107130] bio: create slab <bio-0> at 0
[    0.107512] pwm module init!
[    0.109723] SCSI subsystem initialized
[    0.110225] usbcore: registered new interface driver usbfs
[    0.110433] usbcore: registered new interface driver hub
[    0.110801] usbcore: registered new device driver usb
[    0.111097] twi_chan_cfg()340 - [twi0] has no twi_regulator.
[    0.111227] twi_chan_cfg()340 - [twi1] has no twi_regulator.
[    0.111456] Linux video capture interface: v2.00
[    0.111650] gpiochip_add: gpios 1024..1028 (axp_pin) failed to register
[    0.112215] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.113108] Switching to clocksource arch_sys_counter
[    0.119984] NET: Registered protocol family 2
[    0.119984] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.119984] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.119984] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.119984] TCP: Hash tables configured (established 2048 bind 2048)
[    0.120225] TCP: reno registered
[    0.120355] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.120593] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.120985] NET: Registered protocol family 1
[    0.121452] standby_mode = 1. 
[    0.121680] wakeup src cnt is : 3. 
[    0.121820] pmu1_enable = 0x1. 
[    0.121940] pmux_id = 0x1. 
[    0.122172] config_pmux_para: script_parser_fetch err. 
[    0.122296] pmu2_enable = 0x0. 
[    0.122423] add_sys_pwr_dm: get ldo name failed
[    0.122651] add_sys_pwr_dm: get ldo name failed
[    0.122774] add_sys_pwr_dm: get ldo name failed
[    0.122897] add_sys_pwr_dm: get ldo name failed
[    0.123125] add_sys_pwr_dm: get ldo name failed
[    0.123248] add_sys_pwr_dm: get ldo name failed
[    0.123474] add_sys_pwr_dm: get ldo name failed
[    0.123598] add_sys_pwr_dm: get ldo name failed
[    0.123720] add_sys_pwr_dm: get ldo name failed
[    0.123947] add_sys_pwr_dm: get ldo name failed
[    0.124068] after inited: sys_mask config = 0x0. 
[    0.124291] dynamic_standby enalbe = 0x0. 
[    0.124462] sunxi_reg_init enter
[    0.126525] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.126818] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.127135] msgmni has been set to 56
[    0.128317] io scheduler noop registered
[    0.128454] io scheduler deadline registered
[    0.128654] io scheduler cfq registered (default)
[    0.129271] [DISP]disp_module_init
[    0.129786] cmdline,disp=
[    0.130184] [DISP] disp_get_rotation_sw,line:68:disp 0 out of range? g_rot_sw=0
[    0.130534] [DISP] disp_init_connections,line:289:NULL pointer: 0, 0
[    0.131503] [DISP] lcd_clk_config,line:886:disp 0, clk: pll(0),clk(0),dclk(0) dsi_rate(0)
[    0.132966] [DISP]disp_module_init finish
[    0.133477] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator.
[    0.133936] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
[    0.134173] sw_uart_pm()890 - uart0 clk is already enable
[    0.134307] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
[    0.247778] console [ttyS0] enabled
[    0.737814] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator.
[    0.745700] spi spi0: master is unqueued, this is deprecated
[    0.753808] Failed to alloc md5
[    0.757463] eth0: Use random mac address
[    0.762122] usbcore: registered new interface driver catc
[    0.768378] usbcore: registered new interface driver kaweth
[    0.774700] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[    0.783272] usbcore: registered new interface driver pegasus
[    0.789803] usbcore: registered new interface driver rtl8150
[    0.796290] usbcore: registered new interface driver asix
[    0.802556] usbcore: registered new interface driver cdc_ether
[    0.809180] usbcore: registered new interface driver cdc_eem
[    0.815721] usbcore: registered new interface driver dm9601
[    0.822081] usbcore: registered new interface driver smsc75xx
[    0.828731] usbcore: registered new interface driver smsc95xx
[    0.835257] [DISP] disp_lcd_pwm_enable,line:1021:pwm device hdl is NULL
[    0.843015] usbcore: registered new interface driver gl620a
[    0.849351] usbcore: registered new interface driver net1080
[    0.855901] usbcore: registered new interface driver plusb
[    0.862163] usbcore: registered new interface driver rndis_host
[    0.868983] usbcore: registered new interface driver cdc_subset
[    0.875716] usbcore: registered new interface driver zaurus
[    0.882171] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    0.890577] usbcore: registered new interface driver int51x1
[    0.897114] usbcore: registered new interface driver kalmia
[    0.903471] usbcore: registered new interface driver ipheth
[    0.909918] usbcore: registered new interface driver sierra_net
[    0.916652] usbcore: registered new interface driver cx82310_eth
[    0.923594] usbcore: registered new interface driver cdc_ncm
[    0.930052] usbcore: registered new interface driver lg-vl600
[    0.936686] usbcore: registered new interface driver qmi_wwan
[    0.943549] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.971131] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.980494] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
[    0.989127] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
[    1.010037] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
[    1.016821] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.024598] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.032841] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.041277] usb usb1: Manufacturer: Linux 3.4.39 ehci_hcd
[    1.047482] usb usb1: SerialNumber: sunxi-ehci
[    1.053225] hub 1-0:1.0: USB hub found
[    1.057525] hub 1-0:1.0: 1 port detected
[    1.062594] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.089650] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    1.098627] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
[    1.107320] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
[    1.174098] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.181867] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.189997] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    1.198140] usb usb2: Manufacturer: Linux 3.4.39 ohci_hcd
[    1.204353] usb usb2: SerialNumber: sunxi-ohci
[    1.209963] hub 2-0:1.0: USB hub found
[    1.214293] hub 2-0:1.0: 1 port detected
[    1.219417] usbcore: registered new interface driver cdc_acm
[    1.225859] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.235026] usbcore: registered new interface driver cdc_wdm
[    1.241433] Initializing USB Mass Storage driver...
[    1.247153] usbcore: registered new interface driver usb-storage
[    1.253944] USB Mass Storage support registered.
[    1.259413] usbcore: registered new interface driver usbserial
[    1.266023] usbserial: USB Serial Driver core
[    1.271140] usbcore: registered new interface driver option
[    1.277468] USB Serial support registered for GSM modem (1-port)
[    1.284447] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    1.291574] sunxikbd_script_init: key para not found, used default para. 
[    1.300339] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
[    1.307857] i2c /dev entries driver
[    1.312242] [VFE]cci probe start cci_sel = 0!
[    1.317218] [VFE]cci probe end cci_sel = 0!
[    1.322029] [VFE]cci_init end
[    1.325551] [VFE]Welcome to Video Front End driver
[    1.331245] [VFE]pdev->id = 1
[    1.334651] [VFE]dev->mipi_sel = 1
[    1.338637] [VFE]dev->vip_sel = 1
[    1.342448] [VFE]dev->isp_sel = 0
[    1.352354] [VFE_WARN]vfe vpu clock is null
[    1.357517] [VFE_ERR]vip1 request pinctrl handle for device [csi1] failed!
[    1.365478] [VFE]vfe_init end
[    1.369790] platform reg-20-cs-dcdc2: Driver reg-20-cs-dcdc2 requests probe deferral
[    1.378681] [VFE]probe_work_handle start!
[    1.383365] [VFE]..........................vfe clk open!.......................
[    1.391748] platform reg-20-cs-dcdc3: Driver reg-20-cs-dcdc3 requests probe deferral
[    1.400719] platform reg-20-cs-ldo1: Driver reg-20-cs-ldo1 requests probe deferral
[    1.409444] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
[    1.418282] [VFE]v4l2 subdev register input_num = 0
[    1.423928] [VFE]vfe sensor detect start! input_num = 0
[    1.429842] [VFE]Find sensor name is "ov5640", i2c address is 78, type is "YUV" !
[    1.438371] [VFE]Sub device register "ov5640" i2c_addr = 0x78 start!
[    1.445540] [VFE_ERR]Error registering v4l2 subdevice No such device!
[    1.452910] [VFE_ERR]vfe sensor register check error at input_num = 0
[    1.460313] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
[    1.469051] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
[    1.477814] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
[    1.487041] [VFE]V4L2 device registered as video1
[    1.492418] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0
[    1.499681] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf
[    1.510965] [VFE]..........................vfe clk close!.......................
[    1.519711] [VFE]probe_work_handle end!
[    1.524273] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)
[    1.531757] wdt_enable, write reg 0xf1c20cb8 val 0x00000000
[    1.538056] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec
[    1.549954] sunxi_leds_fetch_sysconfig_para leds is not used in config
[    1.557480] =========script_get_err============
[    1.564103] usbcore: registered new interface driver usbhid
[    1.570538] usbhid: USB HID core driver
[    1.575561] ashmem: initialized
[    1.579298] logger: created 256K log 'log_main'
[    1.584942] logger: created 32K log 'log_events'
[    1.590357] logger: created 32K log 'log_radio'
[    1.595636] logger: created 32K log 'log_system'
[    1.606895] asoc: sndcodec <-> sunxi-codec mapping ok
[    1.612686] *******************Try sdio*******************
[    1.621126] TCP: cubic registered
[    1.625001] NET: Registered protocol family 17
[    1.630254] VFP support v0.3: [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5,  RTO !!
[    1.640507] ThumbEE CPU extension supported.
[    1.645483] *******************Try sd *******************
[    1.651613] Registering SWP/SWPB emulation handler
[    1.658081] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
[    1.667140] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
[    1.677168] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
[    1.688018] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
[    1.696613] platform reg-20-cs-ldo1: Driver reg-20-cs-ldo1 requests probe deferral
[    1.705301] platform reg-20-cs-dcdc3: Driver reg-20-cs-dcdc3 requests probe deferral
[    1.714174] platform reg-20-cs-dcdc2: Driver reg-20-cs-dcdc2 requests probe deferral
[    1.722981] sunxi-rtc sunxi-rtc: setting system clock to 1970-01-01 00:00:10 UTC (10)
[    1.733372] ALSA device list:
[    1.736805]   #0: audiocodec
[    1.740542] Waiting for root device /dev/mmcblk0p2...
[    1.777498] mmc0: new high speed SDHC card at address aaaa
[    1.784150] mmcblk0: mmc0:aaaa SC16G 14.8 GiB 
[    1.793829]  mmcblk0: p1 p2
[    1.797839] mmcblk mmc0:aaaa: Card claimed for testing.
[    1.803921] mmc0:aaaa: SC16G 14.8 GiB 
[    1.808312] platform reg-20-cs-dcdc2: Driver reg-20-cs-dcdc2 requests probe deferral
[    1.817174] *******************sd init ok*******************
[    1.823657] platform reg-20-cs-dcdc3: Driver reg-20-cs-dcdc3 requests probe deferral
[    1.832519] platform reg-20-cs-ldo1: Driver reg-20-cs-ldo1 requests probe deferral
[    1.841079] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
[    1.849727] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
[    1.858414] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
[    1.866975] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
[    1.962903] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    1.974732] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    2.020978] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.030169] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    2.041157] devtmpfs: mounted
[    2.044757] Freeing init memory: 144K
[    2.163985] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
Starting syslogd: OK
Starting klogd: OK
Initializing random number generator... done.
Starting network: OK

Welcome to Buildroot
buildroot login: root
# 
# 
# 
# 
# i2cdetect -y
BusyBox v1.29.3 (2019-04-29 11:17:35 CST) multi-call binary.

Usage: i2cdetect -l | -F I2CBUS | [-ya] [-q|-r] I2CBUS [FIRST LAST]

Detect I2C chips

        -l      List installed buses
        -F BUS# List functionalities on this bus
        -y      Disable interactive mode
        -a      Force scanning of non-regular addresses
        -q      Use smbus quick write commands for probing (default)
        -r      Use smbus read byte commands for probing
        FIRST and LAST limit probing range
# i2cdetect -l
# fswebcam -S 10 -d /dev/video1 -p YUV420P -r 640x480 test21.jpg
--- Opening /dev/video1...
[   33.650171] [VFE]vfe_open
Trying source module v4l2...[   33.656150] [VFE]..........................vfe clk open!.......................

[   33.667840] [VFE]vfe_open ok
[   33.671467] [VFE_ERR]input index(0) > dev->dev_qty(1)-1 invalid!, device_valid_flag[0] = 0
/dev/video1 opened.
No [   33.681675] [VFE]vfe_close
input was specified, using the f[   33.686958] [VFE]vfe select input flag = 0, s_input have not be used .
irst.
Unable to query [   33.697235] [VFE]..........................vfe clk close!.......................
input 0.
VIDIOC_ENUMIN[   33.708530] [VFE]vfe_close end
PUT: Invalid argument
# 
# 
# 
# 
# 
#

附上我的启动信息。有时间帮我分析原因。

离线

#206 2019-05-15 13:44:08

晕哥
Administrator
注册时间: 2017-09-06
累计积分: 8,154

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

看前面的错误, 觉得应该是 没有生成 /dev/videoX 设备,

看log 果然是视频设备没有注册成功:

[    1.418282] [VFE]v4l2 subdev register input_num = 0
[    1.423928] [VFE]vfe sensor detect start! input_num = 0
[    1.429842] [VFE]Find sensor name is "ov5640", i2c address is 78, type is "YUV" !
[    1.438371] [VFE]Sub device register "ov5640" i2c_addr = 0x78 start!
[    1.445540] [VFE_ERR]Error registering v4l2 subdevice No such device!
[    1.452910] [VFE_ERR]vfe sensor register check error at input_num = 0

menuconfig 里面有 ov5640 吗? ov5640 与 ov5647 的设备Id 不同的。

离线

#207 2019-05-15 13:46:25

晕哥小弟
会员
注册时间: 2019-04-04
累计积分: 202

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

不对吧,你往下看,产生了 /dev/video1啊

离线

#208 2019-05-15 14:19:19

晕哥
Administrator
注册时间: 2017-09-06
累计积分: 8,154

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

晕哥小弟 说:

不对吧,你往下看,产生了 /dev/video1啊

嗯, 眼花了。

找到这个, 问题和你的一样,
https://licheezero.readthedocs.io/zh/latest/系统开发/bsp_cam.html

但是我仍然没看出来他是如何解决的.

离线

#209 2019-05-15 14:29:25

晕哥小弟
会员
注册时间: 2019-04-04
累计积分: 202

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

这就咋玩了,主线生成不了/dev/video*  BSP 虽然生成了/dev/video1但是拍照会发生上面的错误。。。。。。

离线

#210 2019-05-15 14:32:49

晕哥
Administrator
注册时间: 2017-09-06
累计积分: 8,154

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

晕哥小弟 说:

这就咋玩了,主线生成不了/dev/video*  BSP 虽然生成了/dev/video1但是拍照会发生上面的错误。。。。。。

有没有试过这个: https://whycan.cn/t_1780.html

离线

#211 2019-05-15 14:35:41

晕哥小弟
会员
注册时间: 2019-04-04
累计积分: 202

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

晕哥 说:
晕哥小弟 说:

这就咋玩了,主线生成不了/dev/video*  BSP 虽然生成了/dev/video1但是拍照会发生上面的错误。。。。。。

有没有试过这个: https://whycan.cn/t_1780.html


我这边是得到的消息是 ov5647停产了。而且市面上不好购买。另外我用fswebcam拍照的话,10次大概有1-2次拍照出来是个空照片。

离线

#212 2019-05-15 15:05:07

晕哥
Administrator
注册时间: 2017-09-06
累计积分: 8,154

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

晕哥小弟 说:
晕哥 说:
晕哥小弟 说:

这就咋玩了,主线生成不了/dev/video*  BSP 虽然生成了/dev/video1但是拍照会发生上面的错误。。。。。。

有没有试过这个: https://whycan.cn/t_1780.html


我这边是得到的消息是 ov5647停产了。而且市面上不好购买。另外我用fswebcam拍照的话,10次大概有1-2次拍照出来是个空照片。

用上面的固件, 会有空照片?

离线

#213 2019-05-15 15:39:58

晕哥小弟
会员
注册时间: 2019-04-04
累计积分: 202

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

晕哥 说:
晕哥小弟 说:
晕哥 说:

有没有试过这个: https://whycan.cn/t_1780.html


我这边是得到的消息是 ov5647停产了。而且市面上不好购买。另外我用fswebcam拍照的话,10次大概有1-2次拍照出来是个空照片。

用上面的固件, 会有空照片?

是的,我之前测试的时候发现的,好像拍了十几张的样子,然后有一张图片生成了,但是就是没有图像。后来我就没有管了。换linux了。

离线

#214 2019-05-15 18:57:05

lgliang
会员
注册时间: 2019-04-26
累计积分: 11

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

Jmhh247 说:
晕哥 说:

先用 bmp 文件测试, 如果 bmp 文件都正常, 说明缺 png 库.

那可能 buildroot 没有勾上 libpng,
也可能勾上了 libpng,
但是你的 Qt 路径, plugins 子目录下面没有 png 插件,
缺一不可.

折腾了两天,终于能显示png了。。。

确实在buildroot里面勾上 png相关支持就可以了,然后要删除掉qt5目录内的.stamp_built .stamp_configured 。

刚开始我没删掉这些,生成的根文件系统还是不支持显示png

感觉自己蠢哭了。。。


我也遇到了这个问题,请问是删除掉“./buildroot-2017.08.1/output/build/qt5base-5.9.1/.stamp_built”,和 “./buildroot-2017.08.1/output/build/qt5base-5.9.1/.stamp_configured” 这两个目录下的文件么,请指教!!

离线

#215 2019-05-15 20:22:44

晕哥
Administrator
注册时间: 2017-09-06
累计积分: 8,154

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

可以先这样试一试

离线

#216 2019-05-15 22:36:06

晕哥小弟
会员
注册时间: 2019-04-04
累计积分: 202

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

晕哥,有方法可以把主线的uboot.bin   +  bsp kernel  + script.bin 等等打包一个img文件,我烧到flash中,之前好像在论坛里面看到。今天早了很长时间没有找到。

离线

#217 2019-05-16 08:08:45

晕哥
Administrator
注册时间: 2017-09-06
累计积分: 8,154

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

晕哥小弟 说:

晕哥,有方法可以把主线的uboot.bin   +  bsp kernel  + script.bin 等等打包一个img文件,我烧到flash中,之前好像在论坛里面看到。今天早了很长时间没有找到。

https://whycan.cn/t_682.html (licheepi zero BSP 内核(linux3.4) 编译教程)

离线

#218 2019-05-16 08:38:46

晕哥小弟
会员
注册时间: 2019-04-04
累计积分: 202

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

晕哥,上面你提供的链接,我搜到了,我现在的环境是主线u-boot + BSP 内核。想烧写到spi-flash中。

离线

#219 2019-05-16 08:46:58

晕哥
Administrator
注册时间: 2017-09-06
累计积分: 8,154

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

晕哥小弟 说:

晕哥,上面你提供的链接,我搜到了,我现在的环境是主线u-boot + BSP 内核。想烧写到spi-flash中。

可以的, 貌似我以前做过 flash 固件, 刚刚没找到。

离线

#220 2019-05-16 08:51:54

晕哥小弟
会员
注册时间: 2019-04-04
累计积分: 202

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

我其实不需要固件,我需要个步骤。 因为现在我有主线的uboot  BSPkernel +  boot.scr  + script.bin +还有一个rootfs (我不知道是什么格式,是buildroot生成的) 这些我不知道烧写到什么位置。

离线

#221 2019-05-16 10:27:41

晕哥小弟
会员
注册时间: 2019-04-04
累计积分: 202

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

晕哥,按照自己的理解,和参照网上。自己折腾了下。
https://whycan.cn/t_682.html (licheepi zero BSP 内核(linux3.4) 编译教程)
21、启动不起来,任何串口任何信息都没有。

最近编辑记录 晕哥小弟 (2019-05-16 11:46:59)

离线

#222 2019-05-16 10:48:33

晕哥
Administrator
注册时间: 2017-09-06
累计积分: 8,154

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

串口连 u-boot 信息都没有?

到这里跟帖吧:
https://whycan.cn/t_682.html (licheepi zero BSP 内核(linux3.4) 编译教程)

离线

#223 2019-05-17 16:09:25

jianke512
会员
注册时间: 2019-05-17
累计积分: 3

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

晕哥,现在调试LecheePi Zero,屏幕800x480,已按照1楼的配置更改UBOOT,kernel用的800x480的dtb,启动过程中UBOOT屏幕可以显示,linux kernel屏幕不显示并且kernel hang住,请帮忙给些调试建议

kernle停在Console: switching to colour dummy device 80x30位置不动了



U-Boot SPL 2017.01-rc2 (May 17 2019 - 15:06:54)                                 
DRAM: 64 MiB                                                                    
Trying to boot from MMC1                                                        
                                                                                
U-Boot 2017.01-rc2 (May 17 2019 - 15:06:54 +0800) Allwinner Technology          
                                                                                
CPU:   Allwinner V3s (SUN8I 1681)                                               
Model: Lichee Pi Zero                                                           
DRAM:  64 MiB                                                                   
MMC:   SUNXI SD/MMC: 0                                                          
*** Warning - bad CRC, using default environment                                
                                                                                
Setting up a 800x480 lcd console (overscan 0x0)                                 
dotclock: 33000kHz = 33000kHz: (1 * 3MHz * 66) / 6                              
In:    serial@01c28000                                                          
Out:   serial@01c28000                                                          
Err:   serial@01c28000                                                          
                                                                                
                                                                                
U-Boot 2017.01-rc2 (May 17 2019 - 15:06:54 +0800) Allwinner Technology          
                                                                                
CPU:   Allwinner V3s (SUN8I 1681)                                               
Model: Lichee Pi Zero                                                           
DRAM:  64 MiB                                                                   
MMC:   SUNXI SD/MMC: 0                                                          
*** Warning - bad CRC, using default environment                                
                                                                                
Setting up a 800x480 lcd console (overscan 0x0)                                 
dotclock: 33000kHz = 33000kHz: (1 * 3MHz * 66) / 6                              
In:    serial@01c28000                                                          
Out:   serial@01c28000                                                          
Err:   serial@01c28000                                                          
Net:   No ethernet found.                                                       
starting USB...                                                                 
No controllers found                                                            
Hit any key to stop autoboot:  0                                                
reading zImage                                                                  
4021504 bytes read in 218 ms (17.6 MiB/s)                                       
reading sun8i-v3s-licheepi-zero-with-800x480-lcd.dtb                            
11953 bytes read in 27 ms (431.6 KiB/s)                                         
## Flattened Device Tree blob at 41800000                                       
   Booting using the fdt blob at 0x41800000                                     
   Loading Device Tree to 42dfa000, end 42dffeb0 ... OK                         
                                                                                
Starting kernel ...                                                             
                                                                                
[    0.000000] Booting Linux on physical CPU 0x0                                
[    0.000000] Linux version 4.14.14-licheepi-zero (root@muwei) (gcc version 7.9
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d  
[    0.000000] CPU: div instructions available: patching division code          
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructie
[    0.000000] OF: fdt: Machine model: Lichee Pi Zero                           
[    0.000000] Memory policy: Data cache writealloc                             
[    0.000000] random: fast init done                                           
[    0.000000] percpu: Embedded 16 pages/cpu @c3de6000 s33740 r8192 d23604 u6556
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 15883     
[    0.000000] Kernel command line: console=ttyS0,115200 rootwait root=/dev/mmcw
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)              
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)    
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)     
[    0.000000] Memory: 53512K/64036K available (6144K kernel code, 284K rwdata,)
[    0.000000] Virtual kernel memory layout:                                    
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)                
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)                
[    0.000000]     vmalloc : 0xc4000000 - 0xff800000   ( 952 MB)                
[    0.000000]     lowmem  : 0xc0000000 - 0xc3e89000   (  62 MB)                
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)                
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)                
[    0.000000]       .text : 0xc0008000 - 0xc0700000   (7136 kB)                
[    0.000000]       .init : 0xc0900000 - 0xc0a00000   (1024 kB)                
[    0.000000]       .data : 0xc0a00000 - 0xc0a473a0   ( 285 kB)                
[    0.000000]        .bss : 0xc0a4e6dc - 0xc0a902e4   ( 264 kB)                
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1       
[    0.000000] Hierarchical RCU implementation.                                 
[    0.000000]  RCU event tracing is enabled.                                   
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.            
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1     
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16                  
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).            
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
[    0.000018] Switching to timer-based delay loop, resolution 41ns             
[    0.000179] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, maxs
[    0.000430] Console: colour dummy device 80x30                               
[    0.000470] Calibrating delay loop (skipped), value calculated using timer f)
[    0.000486] pid_max: default: 32768 minimum: 301                             
[    0.000612] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)      
[    0.000627] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) 
[    0.001273] CPU: Testing write buffer coherency: ok                          
[    0.001665] /cpus/cpu@0 missing clock-frequency property                     
[    0.001692] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000                 
[    0.002158] Setting up static identity map for 0x40100000 - 0x40100060       
[    0.002338] Hierarchical SRCU implementation.                                
[    0.002846] smp: Bringing up secondary CPUs ...                              
[    0.002860] smp: Brought up 1 node, 1 CPU                                    
[    0.002868] SMP: Total of 1 processors activated (48.00 BogoMIPS).           
[    0.002876] CPU: All CPU(s) started in SVC mode.                             
[    0.003681] devtmpfs: initialized                                            
[    0.006874] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5
[    0.007170] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
[    0.007198] futex hash table entries: 256 (order: 2, 16384 bytes)            
[    0.007379] pinctrl core: initialized pinctrl subsystem                      
[    0.008361] NET: Registered protocol family 16                               
[    0.008834] DMA: preallocated 256 KiB pool for atomic coherent allocations   
[    0.009885] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint.
[    0.009982] hw-breakpoint: maximum watchpoint size is 8 bytes.               
[    0.021743] SCSI subsystem initialized                                       
[    0.021993] usbcore: registered new interface driver usbfs                   
[    0.022046] usbcore: registered new interface driver hub                     
[    0.022140] usbcore: registered new device driver usb                        
[    0.022382] pps_core: LinuxPPS API ver. 1 registered                         
[    0.022393] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
[    0.022415] PTP clock support registered                                     
[    0.022612] Advanced Linux Sound Architecture Driver Initialized.            
[    0.024319] clocksource: Switched to clocksource arch_sys_counter            
[    0.034142] NET: Registered protocol family 2                                
[    0.034814] TCP established hash table entries: 1024 (order: 0, 4096 bytes)  
[    0.034849] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)         
[    0.034872] TCP: Hash tables configured (established 1024 bind 1024)         
[    0.035007] UDP hash table entries: 256 (order: 1, 8192 bytes)               
[    0.035059] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)          
[    0.035282] NET: Registered protocol family 1                                
[    0.035967] RPC: Registered named UNIX socket transport module.              
[    0.035989] RPC: Registered udp transport module.                            
[    0.035995] RPC: Registered tcp transport module.                            
[    0.036001] RPC: Registered tcp NFSv4.1 backchannel transport module.        
[    0.037885] workingset: timestamp_bits=30 max_order=14 bucket_order=0        
[    0.043680] NFS: Registering the id_resolver key type                        
[    0.043740] Key type id_resolver registered                                  
[    0.043749] Key type id_legacy registered                                    
[    0.047928] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
[    0.047952] io scheduler noop registered                                     
[    0.047960] io scheduler deadline registered                                 
[    0.048260] io scheduler cfq registered (default)                            
[    0.048274] io scheduler mq-deadline registered                              
[    0.048282] io scheduler kyber registered                                    
[    0.048869] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO              
[    0.052104] sun8i-v3s-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver  
[    0.052982] pwm-backlight backlight: backlight supply power not found, usingr
[    0.147212] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled         
[    0.150251] console [ttyS0] disabled                                         
[    0.170534] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 34, base_baud = 1A
[    0.749735] console [ttyS0] enabled                                          
[    0.756268] panel-simple panel: panel supply power not found, using dummy rer
[    0.765453] libphy: Fixed MDIO Bus: probed                                   
[    0.769921] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver       
[    0.776531] ehci-platform: EHCI generic platform driver                      
[    0.782032] ehci-platform 1c1a000.usb: EHCI Host Controller                  
[    0.787700] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus 1
[    0.795653] ehci-platform 1c1a000.usb: irq 26, io mem 0x01c1a000             
[    0.824364] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00            
[    0.831462] hub 1-0:1.0: USB hub found                                       
[    0.835402] hub 1-0:1.0: 1 port detected                                     
[    0.839938] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver           
[    0.846239] ohci-platform: OHCI generic platform driver                      
[    0.851805] ohci-platform 1c1a400.usb: Generic Platform OHCI controller      
[    0.858530] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus 2
[    0.866485] ohci-platform 1c1a400.usb: irq 27, io mem 0x01c1a400             
[    0.939323] hub 2-0:1.0: USB hub found                                       
[    0.943162] hub 2-0:1.0: 1 port detected                                     
[    0.950768] udc-core: couldn't find an available UDC - added [g_cdc] to lists
[    0.960467] sun6i-rtc 1c20400.rtc: rtc core: registered rtc-sun6i as rtc0    
[    0.967364] sun6i-rtc 1c20400.rtc: RTC enabled                               
[    0.971933] i2c /dev entries driver                                          
[    0.976832] input: ns2009_ts as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-000
[    0.985861] IR NEC protocol handler initialized                              
[    0.990400] IR RC5(x/sz) protocol handler initialized                        
[    0.995533] IR RC6 protocol handler initialized                              
[    1.000061] IR JVC protocol handler initialized                              
[    1.004610] IR Sony protocol handler initialized                             
[    1.009220] IR SANYO protocol handler initialized                            
[    1.013917] IR Sharp protocol handler initialized                            
[    1.018628] IR MCE Keyboard/mouse protocol handler initialized               
[    1.024464] IR XMP protocol handler initialized                              
[    1.029670] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, no)
[    1.094359] sunxi-mmc 1c0f000.mmc: base:0xc406b000 irq:24                    
[    1.101308] usbcore: registered new interface driver usbhid                  
[    1.106979] usbhid: USB HID core driver                                      
[    1.112789] NET: Registered protocol family 17                               
[    1.117475] Key type dns_resolver registered                                 
[    1.121869] Registering SWP/SWPB emulation handler                           
[    1.134778] simple-framebuffer 43e89000.framebuffer: framebuffer at 0x43e8900
[    1.145375] simple-framebuffer 43e89000.framebuffer: format=x8r8g8b8, mode=80
[    1.161569] Console: switching to colour frame buffer device 100x30          
[    1.174080] simple-framebuffer 43e89000.framebuffer: fb0: simplefb registere!
[    1.182839] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).      
[    1.189586] [drm] No driver support for vblank timestamp query.              
[    1.204990] sun4i-drm display-engine: bound 1100000.mixer (ops 0xc0743094)   
[    1.212352] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xc0)
[    1.220086] fb: switching to sun4i-drm-fb from simple                        
[    1.225268] Console: switching to colour dummy device 80x30 

离线

#224 2019-05-17 16:18:32

晕哥
Administrator
注册时间: 2017-09-06
累计积分: 8,154

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

Console: switching to colour dummy device 80x30

感觉应该是你的 u-boot bootargs 里面的 console 参数不是 /dev/ttyS0

导致默认控制台发生了切换.

离线

#225 2019-05-17 17:17:37

jianke512
会员
注册时间: 2019-05-17
累计积分: 3

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

晕哥,在Kernel的log中已确认console=ttyS0,与你在一楼推荐的CONFIG_BOOTARGS设置一样
另外Kernel version 4.14
困扰中

离线

#226 2019-05-17 17:20:57

晕哥
Administrator
注册时间: 2017-09-06
累计积分: 8,154

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

jianke512 说:

晕哥,在Kernel的log中已确认console=ttyS0,与你在一楼推荐的CONFIG_BOOTARGS设置一样
另外Kernel version 4.14
困扰中

参考1: https://whycan.cn/t_2388.html (荔枝派zero/小智极客S3/V3s使用sunxi-fel 借 u-boot 启动 Linux系统, 无需 spi flash / TF 卡)


参考这个帖子, 一个一个替换文件, 逐步排除问题。

离线

#227 2019-05-19 16:31:06

lgliang
会员
注册时间: 2019-04-26
累计积分: 11

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

晕哥版主:“buildroot-2017.08.1” 自带的/usr/bin/ts_calibrate,测试时,提示“tslib: Selected device is not a touchscreen (must support ABS and KEY event types)”。 以前手动按装tslib. 设置:export TSLIB_TSDEVICE=/dev/input/event1
就可以找到touchscreen , “buildroot-2017.08.1” 自带的/usr/bin/ts_calibrate设置没有效果。

最近编辑记录 lgliang (2019-05-19 16:31:34)

离线

#228 2019-05-19 16:37:42

晕哥
Administrator
注册时间: 2017-09-06
累计积分: 8,154

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

提示“tslib: Selected device is not a touchscreen (must support ABS and KEY event types)”。

是 TSLIB_TSDEVICE 环境变量没有测试

那现在可以了吗?

离线

#229 2019-05-19 16:49:34

lgliang
会员
注册时间: 2019-04-26
累计积分: 11

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

手动export TSLIB_TSDEVICE=/dev/input/event1 就可以了,我之前把这个命令写入/etc/profile里面没有效果,发现这个电阻触摸屏不是很准确。有时会跳动

最近编辑记录 lgliang (2019-05-19 17:04:13)

离线

#230 2019-05-19 17:09:28

晕哥
Administrator
注册时间: 2017-09-06
累计积分: 8,154

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

lgliang 说:

手动export TSLIB_TSDEVICE=/dev/input/event1 就可以了,我之前把这个命令写入/etc/profile里面没有效果,发现这个电阻触摸屏不是很准确。有时会跳动

触摸不准是因为驱动没有防抖, 据说 tslib 的插件有防抖功能, 你研究一下.



驱动防抖 @john78 大神已经实现了: https://whycan.cn/t_1259.html#p14265

离线

#231 2019-05-19 17:11:19

lgliang
会员
注册时间: 2019-04-26
累计积分: 11

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

好的,谢谢晕哥

离线

#232 2019-05-20 14:01:19

jianke512
会员
注册时间: 2019-05-17
累计积分: 3

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

晕哥 说:
jianke512 说:

晕哥,在Kernel的log中已确认console=ttyS0,与你在一楼推荐的CONFIG_BOOTARGS设置一样
另外Kernel version 4.14
困扰中

参考1: https://whycan.cn/t_2388.html (荔枝派zero/小智极客S3/V3s使用sunxi-fel 借 u-boot 启动 Linux系统, 无需 spi flash / TF 卡)


参考这个帖子, 一个一个替换文件, 逐步排除问题。

Hi,

   晕哥,此问题解决,参考以下链接的改法OK了,谢谢

https://www.lotlab.org/2018/07/28/record-of-using-licheepi-zero-part-1-u-boot-linux-buildroot/

离线

#233 2019-05-21 09:33:13

lgliang
会员
注册时间: 2019-04-26
累计积分: 11

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

请问晕哥,buildroot上的mPlayer是使用的软解码还是硬解码。

离线

#234 2019-05-21 09:36:35

晕哥
Administrator
注册时间: 2017-09-06
累计积分: 8,154

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

lgliang 说:

请问晕哥,buildroot上的mPlayer是使用的软解码还是硬解码。

软解。


因为硬解码没有统一的标准。

离线

#235 2019-06-19 15:40:02

tobunto
会员
注册时间: 2019-03-04
累计积分: 5

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

我跟着教程都走通了,但是挂载emdebian系统后,启动时出错了,emdebian系统是根据https://licheezero.readthedocs.io/zh/latest/系统开发/emdebian.html制作的,错误是Starting init: /etc/init exists but couldn't execute it (error -13)
/bin/sh: 0: Can't open earlyprintk,没找到原因,有了解的能指点下吗。

离线

#236 2019-06-19 15:46:49

nuvoton
会员
注册时间: 2019-06-17
累计积分: 34

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

/etc/init exists but couldn't execute it (error -13)

/etc/init 存在, 但是不能执行, 看文件是不是没有执行属性, 或者依赖的库不存在,还是别的问题?

离线

#237 2019-06-20 09:13:32

tobunto
会员
注册时间: 2019-03-04
累计积分: 5

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

debian系统的/etc/init是个目录,/etc/init/下也都是一些配置文件,应该与执行权限没关

离线

#238 2019-06-20 09:20:08

晕哥
Administrator
注册时间: 2017-09-06
累计积分: 8,154

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

tobunto 说:

debian系统的/etc/init是个目录,/etc/init/下也都是一些配置文件,应该与执行权限没关

那你的 bootargs 是什么? 系统第一个执行程序是 init=/etc/init ?

离线

#239 2019-06-20 09:35:47

tobunto
会员
注册时间: 2019-03-04
累计积分: 5

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

没指定第一个启动程序,是按帖子上面的配的:#define CONFIG_BOOTARGS      "console=ttyS0,115200 panic=5 rootwait root=/dev/mmcblk0p2 earlyprintk rw rootfstype=ext4 rootdelay=8 vt.global_cursor_default=0"

离线

#240 2019-07-04 00:14:25

xk100
会员
注册时间: 2018-12-13
累计积分: 14

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

jianke512 说:
晕哥 说:
jianke512 说:

晕哥,在Kernel的log中已确认console=ttyS0,与你在一楼推荐的CONFIG_BOOTARGS设置一样
另外Kernel version 4.14
困扰中

参考1: https://whycan.cn/t_2388.html (荔枝派zero/小智极客S3/V3s使用sunxi-fel 借 u-boot 启动 Linux系统, 无需 spi flash / TF 卡)


参考这个帖子, 一个一个替换文件, 逐步排除问题。

Hi,

   晕哥,此问题解决,参考以下链接的改法OK了,谢谢

https://www.lotlab.org/2018/07/28/record-of-using-licheepi-zero-part-1-u-boot-linux-buildroot/

碰到同样的问题。明天试试。

离线

#241 2019-07-05 21:47:30

晕哥小弟
会员
注册时间: 2019-04-04
累计积分: 202

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

买了一块licheepi zero ,准备在家试试 主线 uboot  +主线  kernel 。我发现kernel 的提交记录都是两年前的,是不是太老了。如果想玩是不是可以用最新的kernel 5.几版本好像。

离线

#242 2019-07-05 21:53:24

smartcar
会员
注册时间: 2018-02-19
累计积分: 412

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

4.13/4.14 还行, 用来量产了.

离线

#243 2019-07-24 17:18:36

太一酱鸭
会员
注册时间: 2019-07-03
累计积分: 76

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

root@wuyu-virtual-machine:/disk3/linuxzero/linux-master# make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j16 INSTALL_MOD_PATH=out modules
  CALL    scripts/atomic/check-atomics.sh
  CALL    scripts/checksyscalls.sh
  Building modules, stage 2.
  MODPOST 4591 modules
ERROR: "__sync_icache_dcache" [drivers/xen/xen-privcmd.ko] undefined!
scripts/Makefile.modpost:94: recipe for target '__modpost' failed
make[1]: *** [__modpost] Error 1
Makefile:1294: recipe for target 'modules' failed
make: *** [modules] Error 2


编译的时候出现这个问题,找了网上好多都没有找到答案

离线

#244 2019-07-24 17:32:09

太一酱鸭
会员
注册时间: 2019-07-03
累计积分: 76

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

太一酱鸭 说:

root@wuyu-virtual-machine:/disk3/linuxzero/linux-master# make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j16 INSTALL_MOD_PATH=out modules
  CALL    scripts/atomic/check-atomics.sh
  CALL    scripts/checksyscalls.sh
  Building modules, stage 2.
  MODPOST 4591 modules
ERROR: "__sync_icache_dcache" [drivers/xen/xen-privcmd.ko] undefined!
scripts/Makefile.modpost:94: recipe for target '__modpost' failed
make[1]: *** [__modpost] Error 1
Makefile:1294: recipe for target 'modules' failed
make: *** [modules] Error 2


编译的时候出现这个问题,找了网上好多都没有找到答案

貌似找到一个,明天上班再看看能不能解决

离线

#245 2019-08-05 10:33:34

太一酱鸭
会员
注册时间: 2019-07-03
累计积分: 76

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

晕哥我用linux3.4编译的zImage,然后一直点亮不了板子无法启动内核

 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
reading /boot.scr
284 bytes read in 14 ms (19.5 KiB/s)
## Executing script at 41900000
reading zImage
1866504 bytes read in 129 ms (13.8 MiB/s)
reading sun8i-v3s-blueberrypi-csi-ov2640.dtb
12240 bytes read in 26 ms (459 KiB/s)
## Flattened Device Tree blob at 41800000
   Booting using the fdt blob at 0x41800000
   Loading Device Tree to 42dfa000, end 42dfffcf ... OK
Cannot setup simplefb: node not found

Starting kernel ...

离线

#246 2019-08-05 10:39:58

太一酱鸭
会员
注册时间: 2019-07-03
累计积分: 76

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

晕哥小弟 说:
晕哥 说:

有没有 /dev/i2cX,   /dev/i2c/X 这些设备, 如果没有可能是 menuconfig 上面没有勾选 I2C User Interface


主要是这个错误

--- Opening /dev/video1...
[   33.650171] [VFE]vfe_open
Trying source module v4l2...[   33.656150] [VFE]..........................vfe clk open!.......................

[   33.667840] [VFE]vfe_open ok
[   33.671467] [VFE_ERR]input index(0) > dev->dev_qty(1)-1 invalid!, device_valid_flag[0] = 0
/dev/video1 opened.
No [   33.681675] [VFE]vfe_close
input was specified, using the f[   33.686958] [VFE]vfe select input flag = 0, s_input have not be used .
irst.
Unable to query [   33.697235] [VFE]..........................vfe clk close!.......................
input 0.
VIDIOC_ENUMIN[   33.708530] [VFE]vfe_close end
PUT: Invalid argument

不知道这个是什么造成的

我也是这个问题,请问您解决了吗

离线

#247 2019-08-05 11:31:36

晕哥小弟
会员
注册时间: 2019-04-04
累计积分: 202

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

我的解决了,你的是自己的板子,还是开发板?

离线

#248 2019-08-05 15:13:57

太一酱鸭
会员
注册时间: 2019-07-03
累计积分: 76

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

晕哥小弟 说:

我的解决了,你的是自己的板子,还是开发板?

我的是荔枝派zero,方便加qq496582128细聊吗

离线

#249 2019-08-05 16:48:26

太一酱鸭
会员
注册时间: 2019-07-03
累计积分: 76

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

晕哥小弟 说:

我的解决了,你的是自己的板子,还是开发板?

大佬方便加或者告诉我一下你的联系方式吗QAQ

离线

#250 2019-08-06 08:13:48

晕哥小弟
会员
注册时间: 2019-04-04
累计积分: 202

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

已经加了。不一定能解决,你的问题还是贴出来,晕哥都能解决的。我的很多很多的问题都是晕哥帮助解决的。

离线

#251 2019-08-15 16:40:54

a1326268019
会员
注册时间: 2019-08-15
累计积分: 1

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

各位大神,请问我编译uboot报这个错误怎么解决啊,u-boot是https://github.com/Lichee-Pi/u-boot下载的
里面确实没有LicheePi_Zero_defconfig
板子是荔枝派Zero V3s开发板

# make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- LicheePi_Zero_defconfig
***
*** Can't find default configuration "arch/../configs/LicheePi_Zero_defconfig"!
***
make[1]: *** [LicheePi_Zero_defconfig] Error 1
make: *** [LicheePi_Zero_defconfig] Error 2

最近编辑记录 a1326268019 (2019-08-15 16:46:09)

离线

#252 2019-08-15 17:32:32

晕哥
Administrator
注册时间: 2017-09-06
累计积分: 8,154

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

用指定的分支, 比如 v3s-spi-experimental

离线

#253 2019-08-29 19:58:39

晕哥小弟
会员
注册时间: 2019-04-04
累计积分: 202

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

主线的kernel 是全志的官网弄出来的,还是索智弄出来的呢?还是licheepi zero的作者弄出来的呢?

离线

#254 2019-10-19 10:07:30

tianjianwudi
会员
注册时间: 2019-10-14
累计积分: 4

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

编译buildroot过程中下载文件太慢了,贼痛苦。
很不易的下载,在此分享下,拷贝到buildroot-2017.08/dl/ 下即可。

https://pan.baidu.com/s/1Pb18GiPxJedcUI-sYFqKQA&shfl=sharepset

离线

#255 2019-10-19 10:15:58

晕哥
Administrator
注册时间: 2017-09-06
累计积分: 8,154

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

感谢楼上的朋友分享!

离线

#256 2019-10-19 15:38:40

tianjianwudi
会员
注册时间: 2019-10-14
累计积分: 4

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

请教晕哥及各位大神,为什么我将qt widgets中的例程编译后放 荔枝派zero 中运行时不显示文字。
一开始报未找到/lib/fonts文件夹,后来将buildroot-2017.08/output/target/usr/share/fonts拷贝到荔枝派中,未报任何信息,但还是不显示文字。

离线

#257 2019-10-19 16:05:10

晕哥
Administrator
注册时间: 2017-09-06
累计积分: 8,154

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

勾选这个选项就可以显示了: BR2_PACKAGE_LIBERATION

离线

#258 2019-10-23 00:41:50

tianjianwudi
会员
注册时间: 2019-10-14
累计积分: 4

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

晕哥 说:

勾选这个选项就可以显示了: BR2_PACKAGE_LIBERATION

晕哥,请问 BR2_PACKAGE_LIBERATION 选项在哪啊?
我在buildroot 下 menuconfig 里找不到 BR2_PACKAGE_LIBERATION ,只在.config里找到以下内容。

#
# Fonts
#
BR2_PACKAGE_BITSTREAM_VERA=y
BR2_PACKAGE_CANTARELL=y
BR2_PACKAGE_DEJAVU=y
BR2_PACKAGE_DEJAVU_MONO=y
BR2_PACKAGE_DEJAVU_SANS=y
BR2_PACKAGE_DEJAVU_SERIF=y
BR2_PACKAGE_DEJAVU_SANS_CONDENSED=y
BR2_PACKAGE_DEJAVU_SERIF_CONDENSED=y
BR2_PACKAGE_FONT_AWESOME=y
BR2_PACKAGE_GHOSTSCRIPT_FONTS=y
BR2_PACKAGE_INCONSOLATA=y
BR2_PACKAGE_LIBERATION=y
BR2_PACKAGE_LIBERATION_MONO=y
BR2_PACKAGE_LIBERATION_SANS=y
BR2_PACKAGE_LIBERATION_SERIF=y

离线

#259 2019-10-23 09:19:49

晕哥
Administrator
注册时间: 2017-09-06
累计积分: 8,154

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

Target packages  --->
    Fonts, cursors, icons, sounds and themes  --->
        [ ] Liberation (Free fonts)

离线

#260 2019-10-27 14:06:25

tianjianwudi
会员
注册时间: 2019-10-14
累计积分: 4

Re: 荔枝派Zero V3s开发板入坑记录 (TF/SD卡启动)(主线Linux,主线u-boot)

谢谢解答!
搞了好几天,还去重新移植qt5,结果还是只要将fonts下子目录中的字体文件移动到fonts目录下就能显示文字了。

离线

页脚