主频提升到 816Mhz, f1c100s 主线软件编码640x480 YUV文件为JPEG 格式, 帧率也只有6fps

ffplay · 2019-08-31 15:07:22

# ffmpeg -s 640x480 -pix_fmt yuv420p -i rawvideoA.yuv -vcodec mjpeg outputA.mov
ffmpeg version 3.4.5 Copyright (c) 2000-2018 the FFmpeg developers
  built with gcc 7.4.0 (Buildroot 2019.02.2)
  configuration: --enable-cross-compile --cross-prefix=/opt/f1c100s/buildroot-2019.02.2/output/host/bin/arm-buildroot-linux-gnueabi- --sysroot=/opt/f1c100s/buildroot-2019.02.2/output/host/arm-buildroot-linux-gnueabi/sysroot --host-cc=/usr/bin/gcc --arch=arm --target-os=linux --disable-stripping --pkg-config=/opt/f1c100s/buildroot-2019.02.2/output/host/bin/pkg-config --disable-static --enable-shared --prefix=/usr --enable-avfilter --disable-version3 --enable-logging --enable-optimizations --disable-extra-warnings --enable-avdevice --enable-avcodec --enable-avformat --enable-network --disable-gray --enable-swscale-alpha --disable-small --enable-dct --enable-fft --enable-mdct --enable-rdft --disable-crystalhd --disable-dxva2 --enable-runtime-cpudetect --disable-hardcoded-tables --disable-mipsdsp --disable-mipsdspr2 --disable-msa --enable-hwaccels --disable-cuda --disable-cuvid --disable-nvenc --disable-avisynth --disable-frei0r --disable-libopencore-amrnb --disable-libopencore-amrwb --disable-libdc1394 --disable-libgsm --disable-libilbc --disable-libvo-amrwbenc --disable-symver --disable-doc --enable-gpl --enable-nonfree --enable-ffmpeg --enable-ffplay --enable-ffserver --enable-avresample --enable-ffprobe --enable-postproc --enable-swscale --enable-indevs --disable-alsa --enable-outdevs --enable-pthreads --enable-zlib --disable-bzlib --disable-libfdk-aac --disable-libcdio --disable-gnutls --enable-openssl --disable-libdrm --disable-libopenh264 --disable-vaapi --disable-vdpau --disable-mmal --disable-omx --disable-omx-rpi --disable-libopencv --disable-libopus --disable-libvpx --disable-libass --disable-libbluray --disable-librtmp --disable-libmp3lame --disable-libmodplug --disable-libspeex --disable-libtheora --disable-libwavpack --disable-iconv --enable-libfreetype --disable-fontconfig --disable-libopenjpeg --disable-libx264 --disable-libx265 --disable-x86asm --disable-mmx --disable-sse --disable-sse2 --disable-sse3 --disable-ssse3 --disable-sse4 --disable-sse42 --disable-avx --disable-avx2 --disable-armv6 --disable-armv6t2 --disable-vfp --disable-neon --disable-altivec --extra-libs=-latomic --enable-pic --cpu=arm926ej-s
  libavutil      55. 78.100 / 55. 78.100
  libavcodec     57.107.100 / 57.107.100
  libavformat    57. 83.100 / 57. 83.100
  libavdevice    57. 10.100 / 57. 10.100
  libavfilter     6.107.100 /  6.107.100
  libavresample   3.  7.  0 /  3.  7.  0
  libswscale      4.  8.100 /  4.  8.100
  libswresample   2.  9.100 /  2.  9.100
  libpostproc    54.  7.100 / 54.  7.100
[rawvideo @ 0x6e370] Estimating duration from bitrate, this may be inaccurate
Input #0, rawvideo, from 'rawvideoA.yuv':
  Duration: 00:00:02.44, start: 0.000000, bitrate: 92160 kb/s
    Stream #0:0: Video: rawvideo (I420 / 0x30323449), yuv420p, 640x480, 92160 kb/s, 25 tbr, 25 tbn, 25 tbc
Stream mapping:
  Stream #0:0 -> #0:0 (rawvideo (native) -> mjpeg (native))
Press [q] to stop, [?] for help
[swscaler @ 0x7fcf0] deprecated pixel format used, make sure you did set range correctly
Output #0, mov, to 'outputA.mov':
  Metadata:
    encoder         : Lavf57.83.100
    Stream #0:0: Video: mjpeg (jpeg / 0x6765706A), yuvj420p(pc), 640x480, q=2-31, 200 kb/s, 25 fps, 12800 tbn, 25 tbc
    Metadata:
      encoder         : Lavc57.107.100 mjpeg
    Side data:
      cpb: bitrate max/min/avg: 0/0/200000 buffer size: 0 vbv_delay: -1
frame=   61 fps=6.2 q=24.8 Lsize=     504kB time=00:00:02.40 bitrate=1718.8kbits/s speed=0.243x    
video:503kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.188468%

ffplay · 2019-08-31 15:12:40

ffplay@ubuntu:/mnt/hgfs/D/newfiles$ ffmpeg -s 640x480 -pix_fmt yuv420p -i /tmp/rawvideoA.yuv -vcodec mjpeg /tmp/outputA.mov 
ffmpeg version 0.8.6-6:0.8.6-1ubuntu2, Copyright (c) 2000-2013 the Libav developers
  built on Mar 30 2013 22:20:06 with gcc 4.7.2
*** THIS PROGRAM IS DEPRECATED ***
This program is only provided for compatibility and will be removed in a future release. Please use avconv instead.
[rawvideo @ 0x2244360] Estimating duration from bitrate, this may be inaccurate
Input #0, rawvideo, from '/tmp/rawvideoA.yuv':
  Duration: N/A, start: 0.000000, bitrate: N/A
    Stream #0.0: Video: rawvideo, yuv420p, 640x480, 25 tbr, 25 tbn, 25 tbc
File '/tmp/outputA.mov' already exists. Overwrite ? [y/N] y
Incompatible pixel format 'yuv420p' for codec 'mjpeg', auto-selecting format 'yuvj420p'
[buffer @ 0x224cec0] w:640 h:480 pixfmt:yuv420p
[avsink @ 0x2243d00] auto-inserting filter 'auto-inserted scaler 0' between the filter 'src' and the filter 'out'
[scale @ 0x2245600] w:640 h:480 fmt:yuv420p -> w:640 h:480 fmt:yuvj420p flags:0x4
Output #0, mov, to '/tmp/outputA.mov':
  Metadata:
    encoder         : Lavf53.21.1
    Stream #0.0: Video: mjpeg, yuvj420p, 640x480, q=2-31, 200 kb/s, 25 tbn, 25 tbc
Stream mapping:
  Stream #0.0 -> #0.0
Press ctrl-c to stop encoding
frame=  275 fps=210 q=24.8 Lsize=    2538kB time=11.00 bitrate=1890.5kbits/s    
video:2536kB audio:0kB global headers:0kB muxing overhead 0.110687%

用辣鸡电脑Ubuntu 试了一下，同样的品质，电脑可以达到 200fps 以上。

ffplay · 2019-08-31 15:45:30

# ffmpeg -s 640x480 -pix_fmt yuv420p -i rawvideoA.yuv -vcodec mjpeg -qscale 3 outputA.mov
ffmpeg version 3.4.5 Copyright (c) 2000-2018 the FFmpeg developers
  built with gcc 7.4.0 (Buildroot 2019.02.2)
  configuration: --enable-cross-compile --cross-prefix=/opt/f1c100s/buildroot-2019.02.2/output/host/bin/arm-buildroot-linux-gnueabi- --sysroot=/opt/f1c100s/buildroot-2019.02.2/output/host/arm-buildroot-linux-gnueabi/sysroot --host-cc=/usr/bin/gcc --arch=arm --target-os=linux --disable-stripping --pkg-config=/opt/f1c100s/buildroot-2019.02.2/output/host/bin/pkg-config --disable-static --enable-shared --prefix=/usr --enable-avfilter --disable-version3 --enable-logging --enable-optimizations --disable-extra-warnings --enable-avdevice --enable-avcodec --enable-avformat --enable-network --disable-gray --enable-swscale-alpha --disable-small --enable-dct --enable-fft --enable-mdct --enable-rdft --disable-crystalhd --disable-dxva2 --enable-runtime-cpudetect --disable-hardcoded-tables --disable-mipsdsp --disable-mipsdspr2 --disable-msa --enable-hwaccels --disable-cuda --disable-cuvid --disable-nvenc --disable-avisynth --disable-frei0r --disable-libopencore-amrnb --disable-libopencore-amrwb --disable-libdc1394 --disable-libgsm --disable-libilbc --disable-libvo-amrwbenc --disable-symver --disable-doc --enable-gpl --enable-nonfree --enable-ffmpeg --enable-ffplay --enable-ffserver --enable-avresample --enable-ffprobe --enable-postproc --enable-swscale --enable-indevs --disable-alsa --enable-outdevs --enable-pthreads --enable-zlib --disable-bzlib --disable-libfdk-aac --disable-libcdio --disable-gnutls --enable-openssl --disable-libdrm --disable-libopenh264 --disable-vaapi --disable-vdpau --disable-mmal --disable-omx --disable-omx-rpi --disable-libopencv --disable-libopus --disable-libvpx --disable-libass --disable-libbluray --disable-librtmp --disable-libmp3lame --disable-libmodplug --disable-libspeex --disable-libtheora --disable-libwavpack --disable-iconv --enable-libfreetype --disable-fontconfig --disable-libopenjpeg --disable-libx264 --disable-libx265 --disable-x86asm --disable-mmx --disable-sse --disable-sse2 --disable-sse3 --disable-ssse3 --disable-sse4 --disable-sse42 --disable-avx --disable-avx2 --disable-armv6 --disable-armv6t2 --disable-vfp --disable-neon --disable-altivec --extra-libs=-latomic --enable-pic --cpu=arm926ej-s
  libavutil      55. 78.100 / 55. 78.100
  libavcodec     57.107.100 / 57.107.100
  libavformat    57. 83.100 / 57. 83.100
  libavdevice    57. 10.100 / 57. 10.100
  libavfilter     6.107.100 /  6.107.100
  libavresample   3.  7.  0 /  3.  7.  0
  libswscale      4.  8.100 /  4.  8.100
  libswresample   2.  9.100 /  2.  9.100
  libpostproc    54.  7.100 / 54.  7.100
[rawvideo @ 0x6e380] Estimating duration from bitrate, this may be inaccurate
Input #0, rawvideo, from 'rawvideoA.yuv':
  Duration: 00:00:02.44, start: 0.000000, bitrate: 92160 kb/s
    Stream #0:0: Video: rawvideo (I420 / 0x30323449), yuv420p, 640x480, 92160 kb/s, 25 tbr, 25 tbn, 25 tbc
Please use -q:a or -q:v, -qscale is ambiguous
File 'outputA.mov' already exists. Overwrite ? [y/N] y
Stream mapping:
  Stream #0:0 -> #0:0 (rawvideo (native) -> mjpeg (native))
Press [q] to stop, [?] for help
[swscaler @ 0x809d0] deprecated pixel format used, make sure you did set range correctly
Output #0, mov, to 'outputA.mov':
  Metadata:
    encoder         : Lavf57.83.100
    Stream #0:0: Video: mjpeg (jpeg / 0x6765706A), yuvj420p(pc), 640x480, q=2-31, 200 kb/s, 25 fps, 12800 tbn, 25 tbc
    Metadata:
      encoder         : Lavc57.107.100 mjpeg
    Side data:
      cpb: bitrate max/min/avg: 0/0/200000 buffer size: 0 vbv_delay: -1
frame=   61 fps=5.9 q=3.0 Lsize=    1257kB time=00:00:02.40 bitrate=4289.1kbits/s speed=0.232x    
video:1256kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.076685%

品质各种调整 3 (2 - 31) 帧率也没什么变化。

ffplay · 2019-08-31 16:13:40

# ffmpeg -s 320x240 -pix_fmt yuv420p -i rawvideoA.yuv -vcodec mjpeg -qscale 31 -vb 100k outputA.mov 
ffmpeg version 3.4.5 Copyright (c) 2000-2018 the FFmpeg developers
  built with gcc 7.4.0 (Buildroot 2019.02.2)
  configuration: --enable-cross-compile --cross-prefix=/opt/f1c100s/buildroot-2019.02.2/output/host/bin/arm-buildroot-linux-gnueabi- --sysroot=/opt/f1c100s/buildroot-2019.02.2/output/host/arm-buildroot-linux-gnueabi/sysroot --host-cc=/usr/bin/gcc --arch=arm --target-os=linux --disable-stripping --pkg-config=/opt/f1c100s/buildroot-2019.02.2/output/host/bin/pkg-config --disable-static --enable-shared --prefix=/usr --enable-avfilter --disable-version3 --enable-logging --enable-optimizations --disable-extra-warnings --enable-avdevice --enable-avcodec --enable-avformat --enable-network --disable-gray --enable-swscale-alpha --disable-small --enable-dct --enable-fft --enable-mdct --enable-rdft --disable-crystalhd --disable-dxva2 --enable-runtime-cpudetect --disable-hardcoded-tables --disable-mipsdsp --disable-mipsdspr2 --disable-msa --enable-hwaccels --disable-cuda --disable-cuvid --disable-nvenc --disable-avisynth --disable-frei0r --disable-libopencore-amrnb --disable-libopencore-amrwb --disable-libdc1394 --disable-libgsm --disable-libilbc --disable-libvo-amrwbenc --disable-symver --disable-doc --enable-gpl --enable-nonfree --enable-ffmpeg --enable-ffplay --enable-ffserver --enable-avresample --enable-ffprobe --enable-postproc --enable-swscale --enable-indevs --disable-alsa --enable-outdevs --enable-pthreads --enable-zlib --disable-bzlib --disable-libfdk-aac --disable-libcdio --disable-gnutls --enable-openssl --disable-libdrm --disable-libopenh264 --disable-vaapi --disable-vdpau --disable-mmal --disable-omx --disable-omx-rpi --disable-libopencv --disable-libopus --disable-libvpx --disable-libass --disable-libbluray --disable-librtmp --disable-libmp3lame --disable-libmodplug --disable-libspeex --disable-libtheora --disable-libwavpack --disable-iconv --enable-libfreetype --disable-fontconfig --disable-libopenjpeg --disable-libx264 --disable-libx265 --disable-x86asm --disable-mmx --disable-sse --disable-sse2 --disable-sse3 --disable-ssse3 --disable-sse4 --disable-sse42 --disable-avx --disable-avx2 --disable-armv6 --disable-armv6t2 --disable-vfp --disable-neon --disable-altivec --extra-libs=-latomic --enable-pic --cpu=arm926ej-s
  libavutil      55. 78.100 / 55. 78.100
  libavcodec     57.107.100 / 57.107.100
  libavformat    57. 83.100 / 57. 83.100
  libavdevice    57. 10.100 / 57. 10.100
  libavfilter     6.107.100 /  6.107.100
  libavresample   3.  7.  0 /  3.  7.  0
  libswscale      4.  8.100 /  4.  8.100
  libswresample   2.  9.100 /  2.  9.100
  libpostproc    54.  7.100 / 54.  7.100
[rawvideo @ 0x6e400] Estimating duration from bitrate, this may be inaccurate
Input #0, rawvideo, from 'rawvideoA.yuv':
  Duration: 00:00:09.76, start: 0.000000, bitrate: 23040 kb/s
    Stream #0:0: Video: rawvideo (I420 / 0x30323449), yuv420p, 320x240, 23040 kb/s, 25 tbr, 25 tbn, 25 tbc
Please use -q:a or -q:v, -qscale is ambiguous
File 'outputA.mov' already exists. Overwrite ? [y/N] y
Stream mapping:
  Stream #0:0 -> #0:0 (rawvideo (native) -> mjpeg (native))
Press [q] to stop, [?] for help
[swscaler @ 0x9cf80] deprecated pixel format used, make sure you did set range correctly
Output #0, mov, to 'outputA.mov':
  Metadata:
    encoder         : Lavf57.83.100
    Stream #0:0: Video: mjpeg (jpeg / 0x6765706A), yuvj420p(pc), 320x240, q=2-31, 100 kb/s, 25 fps, 12800 tbn, 25 tbc
    Metadata:
      encoder         : Lavc57.107.100 mjpeg
    Side data:
      cpb: bitrate max/min/avg: 0/0/100000 buffer size: 0 vbv_delay: -1
frame=  244 fps= 27 q=31.0 Lsize=     673kB time=00:00:09.72 bitrate= 567.2kbits/s speed=1.09x    
video:671kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.247602%

320x240 分辨率可以接近 30fps

ffplay · 2019-08-31 16:22:32

不是的，就是把一个 YUV420P 格式的纯像素文件 rawvideoA.yuv 编码成 jpeg格式的文件,

用于测试 f1c100s 的编码能力。

ffplay · 2019-08-31 16:27:30

晕哥小弟说：

那不就是软件编码么？

对，就是测试软编码，哎，太耗CPU了。

ffplay · 2019-08-31 16:46:46

晕哥小弟说：

1、效果就是看转换的帧数？
2、为什么不用硬件的编码？

1. 一楼红色圈圈那一行可以看帧率，总帧数等
2. 因为还不会，只能先软件搞搞

ffplay · 2019-08-31 18:04:20

感谢楼上朋友耐心指教，请问默认情况下 ff_simple_idct_arm 这个函数是汇编优化的吗?我还有优化的空间吗?目前就是因为摄像头驱动没有搞定，我猜想着先用文件测试，确定编码器速率没有问题才去弄摄像头驱动程序。

看来是不是应该用 f1c200s, 用内存做文件存储，先排除问题。

ffplay · 2019-08-31 21:03:23

多谢楼上朋友指教!

ffplay · 2019-09-17 22:41:49

luo 说：

有弄硬编么？

公司正在申请 tina 的 sdk, 要过些时间才会开始.

ffplay · 2019-10-04 09:09:22

Linux默认开了cache，软解吗速度就是酱紫的

WhyCan Forum(哇酷开发者社区)

楼主 #1 2019-08-31 15:07:22 分享评论

主频提升到 816Mhz, f1c100s 主线软件编码640x480 YUV文件为JPEG 格式, 帧率也只有6fps

楼主 #2 2019-08-31 15:12:40 分享评论

Re: 主频提升到 816Mhz, f1c100s 主线软件编码640x480 YUV文件为JPEG 格式, 帧率也只有6fps

楼主 #3 2019-08-31 15:45:30 分享评论

Re: 主频提升到 816Mhz, f1c100s 主线软件编码640x480 YUV文件为JPEG 格式, 帧率也只有6fps

楼主 #4 2019-08-31 16:13:40 分享评论

Re: 主频提升到 816Mhz, f1c100s 主线软件编码640x480 YUV文件为JPEG 格式, 帧率也只有6fps

楼主 #6 2019-08-31 16:22:32 分享评论

Re: 主频提升到 816Mhz, f1c100s 主线软件编码640x480 YUV文件为JPEG 格式, 帧率也只有6fps

楼主 #8 2019-08-31 16:27:30 分享评论

Re: 主频提升到 816Mhz, f1c100s 主线软件编码640x480 YUV文件为JPEG 格式, 帧率也只有6fps

楼主 #11 2019-08-31 16:46:46 分享评论

Re: 主频提升到 816Mhz, f1c100s 主线软件编码640x480 YUV文件为JPEG 格式, 帧率也只有6fps

楼主 #14 2019-08-31 18:04:20 分享评论

Re: 主频提升到 816Mhz, f1c100s 主线软件编码640x480 YUV文件为JPEG 格式, 帧率也只有6fps

楼主 #16 2019-08-31 21:03:23 分享评论

Re: 主频提升到 816Mhz, f1c100s 主线软件编码640x480 YUV文件为JPEG 格式, 帧率也只有6fps

楼主 #21 2019-09-17 22:41:49 分享评论

Re: 主频提升到 816Mhz, f1c100s 主线软件编码640x480 YUV文件为JPEG 格式, 帧率也只有6fps

楼主 #26 2019-10-04 09:09:22 分享评论

Re: 主频提升到 816Mhz, f1c100s 主线软件编码640x480 YUV文件为JPEG 格式, 帧率也只有6fps

页脚